EC1350 | GAC MSP Packard Sensors - Mating Connector Kit / 2-Terminal

12VDC / Packard Connector without Mating Connector / Kubota 07 Series V2607, V3007, V3307

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / High Temperature Coil for Full Duty Cycle Operation / Not equivalent to Renault 5010438374 which has Saab Connector (Contact GAC for Renault Version)

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

10VDC (From Speed Control) / Variable Speed - Off-Road

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Aluminum Gold Anodized

24VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

24VDC / Packard Connector without Mating Connector

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

Multi-VDC / Deutsch Connector without Mating Connector / Voltage Variable Speed Input 0-5VDC

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

12VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses

24VDC / Terminal Strip

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

ALN Series - Clevis Kit Only

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Deutsch Connector without Mating Connector / Same as ACD110A

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

24VDC / Standard Unit with Idle

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

24VDC / Woodward (8290-038) Speed Control to GAC LSM/SYC

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

24VDC / Variable Speed DC Generator Control / Integrated Current Transformer / 200A Input / 0-8VDC Output / Built-In Power Meter Output

MSP Military-Style (Amphenol) Sensors - 27 ft. [8.2m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

24VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

24VDC / Cummins EFC Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input

10 Turn / 10KΩ