EC1360 | GAC MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

ACE275K, ACE295F, ATBT2/T3-F, 175/176AF (AB Position Sensor) Actuators - Mating Connector Kit / 6-Terminal

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

12VDC / Light-Force (Low-Current Optimized PID)

24VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

176 Series Installation Kit - For Bosch RS/RSV Governor / Left-Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

24VDC / Standard Unit / Flying Leads

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

24VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

10 Turn / 20KΩ / With Knob

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

M8 I.D. End and Thread

MSP / Engine Speed Simulator, Alligator Clips, General Usage

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Aluminum Gold Anodized

JDR Series - Mating Connector Kit / 6-Terminal

USB to RS232 Adapter for PC Interface, GAC Recommended

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

24VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

24VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

10 Turn / 20KΩ / With Locking Shaft

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

10 Turn / 10KΩ

Multi-VDC / For Cummins EFC Reverse Acting or Fire Pump Applications / Expanded Frequency Range 10.5kHz

Multi-VDC / Switchable Soft Coupling and Lead Circuit