EC1502 | GAC EDG6000 Series - Mating Connector Kit / 14-Terminal

12VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

24VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

MSP Military-Style (Amphenol) Sensors - 13 ft. [4m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

24VDC / Volvo EMS I & II EFI Control (2.875V Nominal Input) to GAC LSM/SYC

Multi-VDC / Standard Unit

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

10 Turn / 20KΩ / With Knob

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

Multi-VDC / For Cummins EFC Reverse Acting or Fire Pump Applications / Expanded Frequency Range 10.5kHz

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / 90˚ / 6-Terminal

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

4.86 in. [123mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

10 Turn / 5KΩ / With Knob

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

Multi-VDC / Temperature Compensated

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

175 Series Installation Kit - Bosch EDC Governor Housing - Mounting Plate, Linkage, Gasket, Hardware

12VDC / Packard Connector without Mating Connector / Lever Included

3.19 in. [81mm] Thread Length / 7 in. [178mm] Harness / Flying Leads / Stainless

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Packard Connector without Mating Connector

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

24VDC / Heinzmann EG or KG6-04/10-04 Speed Control to GAC LSM/SYC

24VDC / Woodward (8290-038) Speed Control to GAC LSM/SYC

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

Multi-VDC / Perkins 1306-E87 7M351 to GAC LSM/SYC

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included