EEG6500 | GAC Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

MSP Packard Sensors - 10 ft. [3m] Shielded Harness / 2-Terminal

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

MSP Automotive Sensors - 10 ft. [3m] Shielded Cable / 2-Terminal

Multi-VDC / Standard Unit

EDG6000 Series - Mating Connector Kit / 14-Terminal

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / Straight Connector EC1000 / 6-Terminal

12VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit

24VDC / Standard Unit

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Multi-VDC / Standard Unit

24VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

24VDC / Light-Force (Low-Current Optimized PID)

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

24VDC / Standard Unit

24VDC / Military-Style Connector without Mating Connector / Note - Compatible with EEG6500 Series

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Light-Force (Low-Current Optimized PID)

JDR Series - Mating Connector Kit / 6-Terminal

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

4.3 in. [110mm] - Actuator Control Lever - 1/4 in. [6.35mm] Holes / Serrated Shaft