ESD5526E | GAC Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

MSP Packard Sensors - 10 ft. [3m] Shielded Harness / 2-Terminal

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

Multi-VDC / Standard Unit

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

12VDC / Packard Connector without Mating Connector / Lever Included

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

3.19 in. [81mm] Thread Length / 7 in. [178mm] Harness / Flying Leads / Stainless

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

Multi-VDC / Temperature Compensated

24VDC / Standard Unit

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

Multi-VDC / Perkins 1306-E87 7M351 to GAC LSM/SYC

24VDC / Woodward Load Sharing & Synchronizing (0+/-3V DC Output) to GAC ESD / Including DEC2

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

USB to RS232 Adapter for PC Interface, GAC Recommended

24VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

24VDC / Standard Unit

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

10 Turn / 5KΩ / With Knob

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

120E4 Series - Fuel Valve Service Replacement Kit

24VDC / Terminal Strip