SDG725-01-01 | GAC Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

24VDC / Full-Fuel Starting Aid

24VDC / Military-Style Connector without Mating Connector / Note - Compatible with EEG6500 Series

12VDC / Standard Unit / Flying Leads

12VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

Multi-VDC / Military-Style Connector without Mating Connector / Stop Lever LE1400-4 Included

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

1 Turn / 5KΩ / With Knob

24VDC / Standard Unit with Idle

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

EDG6000 - Programming Interface Assembly with Serial Port

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Multi-VDC / Deutsch Connector without Mating Connector / Voltage Variable Speed Input 0-5VDC

Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

120E4 Series - Fuel Valve Service Replacement Kit

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

12VDC / Light-Force (Low-Current Optimized PID)

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector without Mating Connector / Stainless

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

2.37 in. [60mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals / Aluminum Gold Anodized

10 Turn / 20KΩ / With Knob

12VDC / Deutsch Connector without Mating Connector / Same as ACD110A

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

120E4 Series - Mounting Bracket for Cummins 855 Engines

24VDC / Cummins EFC Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

Multi-VDC / Overspeed Switch

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal