EAM101 | GAC 24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

176 Series Installation Kit - For Bosch RS/RSV Governor / Left-Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

DPG100/101-F & DFT200 Handheld Configuration Tool

Multi-VDC / Automatic Synchronizer with Sync Check Relay

ALN050 Series Installation Kit - Bosch RSV / Right Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

12VDC / Light-Force (Low-Current Optimized PID)

2.7 in. [69mm] Thread Length / 1 ft. [0.3m] Shielded Cable / Flying Leads / Stainless

MSP Military-Style (Amphenol) Sensors - 27 ft. [8.2m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

24VDC / Standard Unit

24VDC / Woodward (8290-038) Speed Control to GAC LSM/SYC

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

Multi-VDC / Overspeed Switch

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

24VDC / Light-Force (Low-Current Optimized PID)

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Stainless

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

1 Turn / 20KΩ / With Knob / Droop Control

Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Packard Connector without Mating Connector / Oil Drain Fitting / Designed for Deutz 1015 Engines / Stop Lever LE1400-4 Included

10VDC (From Speed Control) / Fixed Speed

24VDC / Light-Force (Low-Current Optimized PID)

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / 90° Connector EC1010 / 6-Terminal

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

24VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized