EAM127-24 | GAC 24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

ALN050 Series Installation Kit - Bosch RSV / Right Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

1 Turn / 5KΩ / With Knob

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

12VDC / Packard Connector without Mating Connector / Lever Included

176 Series Installation Kit - For Bosch RS/RSV Governor / Left-Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

24VDC / Packard Connector without Mating Connector / Includes GA102

10VDC (From Speed Control) / Variable Speed - Off-Road

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

Multi-VDC / MTU M-DEC to GAC LSM/SYC

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

24VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

24VDC / Terminal Strip

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

5-Star Torx Bit - Pump Cover Screws (Service Tool)

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

DPG100/101 & DFT200 PS2-USB PC Adapter for use with GAC SmartVu Windows Software

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

12VDC / Packard Connector without Mating Connector / Mitsubishi L-Series L2E, L3E & S-Series S3L, S3L2, S4L, S4L2

Multi-VDC / Switchable Soft Coupling and Lead Circuit

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001) / Built-In Configurable Speed Switch Output / Advanced CAN J1939 support / Battery Voltage, Hour Meters / Variable Speed 0-5VDC or 4-20mA Input

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

24VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)