BK267 | GAC Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

M8 I.D. End and Thread

10 Turn / 20KΩ / With Locking Shaft

12VDC / Packard Connector without Mating Connector

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

24VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

Multi-VDC / Standard Unit

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

180 Series Installation Kit - Spare (Included with Actuator) - Freeze Plug & Hardware

24VDC / Heinzmann EG or KG6-04/10-04 Speed Control to GAC LSM/SYC

24VDC / Packard Connector without Mating Connector

24VDC / Universal - Caterpillar & Cummins / 4-20mA or 0-5VDC Load Sharing Input / 100% Max Duty Cycle Output

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

MSP Automotive Sensors - 10 ft. [3m] Shielded Cable / 2-Terminal

JDR Series - Mating Connector Kit / 6-Terminal

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

24VDC / Standard Unit with Idle

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector without Mating Connector / Stainless

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

12VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

Multi-VDC / Built-In Display / Terminal Strip - SUPERCEDED BY EEG6500, SERVICE ONLY

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / 90˚ Connector EC1110 / 2-Terminal

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

24VDC / Packard Connector without Mating Connector / Oil Drain Fitting / Designed for Deutz 1015 Engines / Stop Lever LE1400-4 Included

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

1 Turn / 20KΩ / With Knob / Droop Control

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

12VDC / Packard Connector without Mating Connector

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

Multi-VDC / Standard Unit

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE