KT7001-MT | GAC 275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Multi-VDC / Two Element Speed Switch - Overspeed, Crank

USB to RS232 Adapter for PC Interface, GAC Recommended

3.45 in. [88mm] Thread Length / 2.25 in. [57mm] Harness / Same as MSP6734 except with Packard Connector without Mating Connector / Aluminum Gold Anodized

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

10VDC (From Speed Control) / Variable Speed - Off-Road

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

24VDC / Universal / 4-20mA Input / 0-5VDC Output / Reverse Polarity

12VDC / Terminal Strip

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

24VDC / Standard Unit / Flying Leads

24VDC / Variable Speed DC Generator Control / Integrated Current Transformer / 200A Input / 0-8VDC Output / Built-In Power Meter Output

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6724 with Mating Harness CH1206 / Aluminum Gold Anodized

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

12VDC / Standard Unit / Flying Leads

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / 90˚ / 6-Terminal

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

24VDC / Packard Connector without Mating Connector / Lever Included

24VDC / Packard Connector without Mating Connector / Oil Drain Fitting / Designed for Deutz 1015 Engines / Stop Lever LE1400-4 Included

Multi-VDC / Military-Style Connector without Mating Connector / Stop Lever LE1400-4 Included