CH251-2134 | GAC ADC (Commercial) Actuators - 7 ft. 2.13m Harness / 2-Terminal

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

24VDC / Cummins EFC Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / 90° Connector EC1010 / 6-Terminal

5-Star Torx Bit - Pump Cover Screws (Service Tool)

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

DPG100/101 & DFT200 PS2-USB PC Adapter for use with GAC SmartVu Windows Software

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

Multi-VDC / MTU M-DEC to GAC LSM/SYC

MSP Packard Sensors - 10 ft. [3m] Shielded Harness / 2-Terminal

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

JDR Series - Mating Connector Kit / 6-Terminal

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

175 Series Installation Kit - For Zexel RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gaskets (Governor Housing and Actuator), Hardware

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

12VDC / Light-Force (Low-Current Optimized PID)

110 Series - Mating Connector Kit / 2-Terminal

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

12VDC / Packard Connector without Mating Connector

Multi-VDC / Built-In Display / Terminal Strip - SUPERCEDED BY EEG6500, SERVICE ONLY

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

3.45 in. [88mm] Thread Length / 2.25 in. [57mm] Harness / Same as MSP6734 except with Packard Connector without Mating Connector / Aluminum Gold Anodized

MSP / Engine Speed Simulator, Alligator Clips, General Usage

Multi-VDC / Overspeed Switch

USB to RS232 Adapter for PC Interface, GAC Recommended

24VDC / Packard Connector without Mating Connector / Oil Drain Fitting / Designed for Deutz 1015 Engines / Stop Lever LE1400-4 Included

Multi-VDC / Replacement for Most ESD5500E Series in a Single Unit

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

12VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

24VDC / Variable Speed DC Generator Control / Integrated Current Transformer / 200A Input / 0-8VDC Output / Built-In Power Meter Output