EC1120 | GAC 110 Series - Mating Connector Kit / 2-Terminal

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

ALN Series - Clevis Kit Only

MSP Military-Style (Amphenol) Sensors - 27 ft. [8.2m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

Multi-VDC / Built-In Display / Terminal Strip - SUPERCEDED BY EEG6500, SERVICE ONLY

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

24VDC / Terminal Strip

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

24VDC / Full-Fuel Starting Aid

24VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

Multi-VDC / Standard Unit

5-Star Torx Bit - Pump Cover Screws (Service Tool)

24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

24VDC / Military-Style Connector without Mating Connector / Specially Designed for MTU / Stop Lever LE1400-4 Included

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / 90˚ Connector EC1110 / 2-Terminal

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

M8 I.D. End and Thread

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

2.7 in. [69mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

24VDC / Deutsch Connector without Mating Connector / Same as ACD110A

100 Series - Actuator Mounting Gasket Spare (Included with Actuator)

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit

12VDC / Packard Connector without Mating Connector / Mitsubishi L-Series L2E, L3E & S-Series S3L, S3L2, S4L, S4L2

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless