RD102 | GAC 1/4-28 Precut to 1 ft. 0.3m, Zinc Plated

Multi-VDC / Automatic Synchronizer with Sync Check Relay

12VDC / Packard Connector without Mating Connector

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / High Temperature Coil for Full Duty Cycle Operation / Not equivalent to Renault 5010438374 which has Saab Connector (Contact GAC for Renault Version)

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

10 Turn / 5KΩ / With Locking Shaft

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

24VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / Straight Connector EC1000 / 6-Terminal

24VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

24VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

24VDC / Light-Force (Low-Current Optimized PID)

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

MSP6741 - Mating Connector Kit / 2-Terminal / Metri-Pack 150 Series (Unsealed)

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

6A / 63V Field

10 Turn / 1KΩ

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

ACE275K, ACE295F, ATBT2/T3-F, 175/176AF (AB Position Sensor) Actuators - Mating Connector Kit / 6-Terminal

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

4.3 in. [110mm] - Actuator Control Lever - 1/4 in. [6.35mm] Holes / Serrated Shaft

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

12VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses

24VDC / Terminal Strip

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

12VDC / Terminal Strip