CH1219 | GAC MSP Packard Sensors - 10 ft. 3m Shielded Harness / 2-Terminal

24VDC / Terminal Strip

Multi-VDC / MTU M-DEC to GAC LSM/SYC

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

Multi-VDC / CAT HUEI System to GAC LSM/SYC

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

Multi-VDC / Perkins 1306-E87 7M351 to GAC LSM/SYC

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

M8 I.D. End and Thread

3 in. [76mm] Thread Length / Military-Style Connector / Same as MSP677 except with Mating Connector Kit EC1100 (Straight) / Stainless

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector without Mating Connector / Stainless

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

12VDC / Packard Connector without Mating Connector / Mitsubishi L-Series L2E, L3E & S-Series S3L, S3L2, S4L, S4L2

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

Multi-VDC / Automatic Synchronizer with Sync Check Relay

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

EDG6000 - Programming Interface Assembly with Serial Port

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

MSP6741 - Mating Connector Kit / 2-Terminal / Metri-Pack 150 Series (Unsealed)

1 Turn / 20KΩ / With Knob / Droop Control

4A / 63V Field / Rear Facing Pots / Replaces Basler AVC63-4D & BE350, McPherson SS350, and Marathon SE350

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

Multi-VDC / For Cummins EFC Reverse Acting or Fire Pump Applications / Expanded Frequency Range 10.5kHz

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware