ESD5120 | GAC Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed)

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

24VDC / Packard Connector without Mating Connector

24VDC / Standard Unit with Idle

12VDC / Light-Force (Low-Current Optimized PID)

24VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

12VDC / Standard Unit

AFR Series - Mating Connector #1 Kit / 35-Terminal

24VDC / Standard Unit

MSP6741 - Mating Connector Kit / 2-Terminal / Metri-Pack 150 Series (Unsealed)

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

Multi-VDC / Anti-Windup Circuit (Gaseous) / Recommended for T3/T4 ATBs

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

3 in. [76mm] Thread Length / Military-Style Connector / Same as MSP677 except with Mating Connector Kit EC1100 (Straight) / Stainless

180 Series Installation Kit - Spare (Included with Actuator) - Freeze Plug & Hardware

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

M8 I.D. End and Thread

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

Multi-VDC / Switchable Soft Coupling and Lead Circuit

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

DPG100/101-F & DFT200 Handheld Configuration Tool

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Full-Fuel Starting Aid

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

ACE275K, ACE295F, ATBT2/T3-F, 175/176AF (AB Position Sensor) Actuators - Mating Connector Kit / 6-Terminal

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

MSP Packard Sensors - 10 ft. [3m] Shielded Harness / 2-Terminal