CH1206 | GAC MSP Automotive Sensors - 4 ft. 1.2m Unshielded Cable / 2-Terminal

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC

10VDC (From Speed Control) / Variable Speed - Off-Road

3.19 in. [81mm] Thread Length / 7 in. [178mm] Harness / Flying Leads / Stainless

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

4.86 in. [123mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

Multi-VDC / One Element Speed Switch - Overspeed

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

Multi-VDC / Overspeed Switch

24VDC / Full-Fuel Starting Aid

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

Multi-VDC / Replacement for Most ESD5500E Series in a Single Unit

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

24VDC / Deutsch Connector without Mating Connector / Same as ACD110A

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

10VDC (From Speed Control) / Fixed Speed

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

Multi-VDC / For Cummins EFC Reverse Acting or Fire Pump Applications / Expanded Frequency Range 10.5kHz

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

Multi-VDC / Built-In Display / Terminal Strip - SUPERCEDED BY EEG6500, SERVICE ONLY

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

Multi-VDC / Anti-Windup Circuit (Gaseous) / Recommended for T3/T4 ATBs

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

24VDC / Heinzmann EG or KG6-04/10-04 Speed Control to GAC LSM/SYC

Multi-VDC / Two Oxygen Sensor Inputs (Pre and Post Catalyst) and EGT (Type-K Thermocouple) Input

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

24VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

Multi-VDC / Automatic Synchronizer with Sync Check Relay

MSP Packard Sensors - Connector Kit Replacement / 2-Terminal