KT291 | GAC ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

10 Turn / 5KΩ / With Knob

DPG100/101-F & DFT200 Handheld Configuration Tool

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6724 with Mating Harness CH1206 / Aluminum Gold Anodized

24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

2.7 in. [69mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

JDR Series - Mating Connector Kit / 6-Terminal

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

24VDC / Light-Force (Low-Current Optimized PID)

24VDC / Packard Connector without Mating Connector / Includes GA102

3.19 in. [81mm] Thread Length / 7 in. [178mm] Harness / Flying Leads / Stainless

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

24VDC / Woodward 2301A to GAC LSM/SYC

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

12VDC / Standard Unit / Flying Leads

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

24VDC / Terminal Strip

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

12VDC / Standard Unit

Multi-VDC / Perkins 1306-E87 7M351 to GAC LSM/SYC

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

24VDC / Volvo EMS I & II EFI Control (2.875V Nominal Input) to GAC LSM/SYC

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001) / Built-In Configurable Speed Switch Output / Advanced CAN J1939 support / Battery Voltage, Hour Meters / Variable Speed 0-5VDC or 4-20mA Input

24VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

24VDC / Deutsch Connector without Mating Connector / Same as ACD110A

6A / 63V Field

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing