EC1310 | GAC ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

24VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

24VDC / Packard Connector without Mating Connector / Lever Included

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

24VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

3 in. [76mm] Thread Length / High Output 913Ω / Military-Style Connector without Mating Half Connector / Stainless

12VDC / Standard Unit / Flying Leads

M5 I.D. End and Thread 14mm Deep

Multi-VDC / Temperature Compensated

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless

EDG6000 Series - Mating Connector Kit / 14-Terminal

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6724 with Mating Harness CH1206 / Aluminum Gold Anodized

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

24VDC / Full-Fuel Starting Aid

12VDC / Light-Force (Low-Current Optimized PID)

AFR Series - 8 ft. [2.4m] Harness / Flying Leads / 35-Wires

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless