LSM100 | GAC 10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

Multi-VDC / Replacement for Most ESD5500E Series in a Single Unit

24VDC / Packard Connector without Mating Connector / Lever Included

EDG6000 Series - Mating Connector Kit / 14-Terminal

24VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

12VDC / Packard Connector without Mating Connector / Kubota 07 Series V2607, V3007, V3307

12VDC / Packard Connector without Mating Connector

MSP6741 - Mating Connector Kit / 2-Terminal / Metri-Pack 150 Series (Unsealed)

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

12VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

Multi-VDC / Switchable Soft Coupling and Lead Circuit

176 Series Installation Kit - Bosch A Pump Bearing Retainer - Plate, Gasket, and Shims

Multi-VDC / Military-Style Connector without Mating Connector / Stop Lever LE1400-4 Included

24VDC / Standard Unit with Idle

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / 90° Connector EC1010 / 6-Terminal

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

24VDC / Packard Connector without Mating Connector

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / 90˚ Connector EC1110 / 2-Terminal

Multi-VDC / Overspeed Switch

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

10VDC (From Speed Control) / Variable Speed - Off-Road

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

24VDC / Woodward (8290-038) Speed Control to GAC LSM/SYC

Multi-VDC / Standard Unit

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

24VDC / Standard Unit

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs