KT6723 | GAC 120E4 Series - Fuel Valve Service Replacement Kit

176 Series Installation Kit - For Bosch RS/RSV Governor / Left-Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

24VDC / Variable Speed DC Generator Control / Integrated Current Transformer / 200A Input / 0-8VDC Output / Built-In Power Meter Output

M8 I.D. End and Thread

180 Series Installation Kit - Spare (Included with Actuator) - Freeze Plug & Hardware

24VDC / Woodward 2301A to GAC LSM/SYC

Multi-VDC / Standard Unit

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

12VDC / Light-Force (Low-Current Optimized PID)

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

12VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

24VDC / Packard Connector without Mating Connector / Lever Included

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / 90˚ Connector EC1110 / 2-Terminal

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

JDR Series - Mating Connector Kit / 6-Terminal

10 Turn / 5KΩ / With Knob

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

DPG100/101-F & DFT200 Handheld Configuration Tool

12VDC / Deutsch Connector without Mating Connector / Same as ACD110A

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

24VDC / Full-Fuel Starting Aid

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

Multi-VDC / MTU M-DEC to GAC LSM/SYC

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

EDG6000 Series - Mating Connector Kit / 14-Terminal

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

12VDC / Light-Force (Low-Current Optimized PID)

SDG Series - Deutsch Mating Connector Kit / SDG514 & 524 / 12-Terminal

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing