MSP6743 | GAC 3.5 in. 89mm Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

12VDC / Packard Connector without Mating Connector / Kubota 07 Series V2607, V3007, V3307

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

Multi-VDC / Standard Unit

10VDC (From Speed Control) / Variable Speed - Off-Road

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

12VDC / Standard Unit

AFR Series - 8 ft. [2.4m] Harness / Flying Leads / 35-Wires

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

24VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

3 in. [76mm] Thread Length / Military-Style Connector / Same as MSP677 except with Mating Connector Kit EC1100 (Straight) / Stainless

ALN050 Series Installation Kit - Bosch RSV / Right Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

12VDC / Light-Force (Low-Current Optimized PID)

EDG6000 Series - Mating Connector Kit / 14-Terminal

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

6A / 63V Field

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

1 Turn / 5KΩ / With Knob

4.3 in. [110mm] - Actuator Control Lever - 1/4 in. [6.35mm] Holes / Serrated Shaft

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

24VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

24VDC / Woodward (8290-038) Speed Control to GAC LSM/SYC

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included