MSP6720 | GAC 3.86 in. 98mm Thread Length / 1 ft. 0.3m Harness / Flying Leads / Aluminum Clear Anodized

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

120E4 Series - Fuel Valve Service Replacement Kit

MSP Packard Sensors - 10 ft. [3m] Shielded Harness / 2-Terminal

10 Turn / 20KΩ / With Locking Shaft

12VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

175 Series Installation Kit - Bosch EDC Governor Housing - Mounting Plate, Linkage, Gasket, Hardware

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Multi-VDC / Automatic Synchronizer with Sync Check Relay

12VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

M5 I.D. End and Thread 14mm Deep

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

24VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

Installation Bracket - ALN025 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

Multi-VDC / Anti-Windup Circuit (Gaseous) / Recommended for T3/T4 ATBs

AFR Series - Mating Connector #1 Kit / 35-Terminal

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

24VDC / Standard Unit

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless